Let's Get Started!
Step 1: Turn your iron on to the Rayon/Cotton setting with full steam and let it warm up
Step 2: Position your tjap/stamp face up. We put the book through the handle of the tjap which helped keep it upright.
Step 3: Position your fabric napped side down over the tjap/stamp.
Step 4: Press the iron down firmly on the fabric, giving bursts of steam now and then, for 10-15 seconds. Move across the face of the tjap lifting up and pressing down. If you push side to side too much you will end up with a less clean imprint.
Step 5: Gently pull up the fabric. Check your imprint and then reposition the fabric for your next print. You can cover the whole piece of fabric in this way if you want. On our scarf we used two tjaps; a center design, and then a thin border.
Here are a few other imprint examples:
These will make beautiful Gifts!
Note: If you make a mistake fear not! You can wash out the fabric and start again. To preserve the design however make sure you dry clean the fabric. The embossed velvet technique is really great for pillows that won't need to be cleaned.
Clothes iron with steam setting
Copper Tjap or other hand stamp that will take the heat; wood or hard rubber are good options if you are very careful. If you own one of our copper tjaps though, they give the most amazing detail!
A book or two to help hold the tjap/stamp in place
If you'd rather speak with a human, please call toll-free from anywhere in the U.S. or Canada M-F 8am to 5pm PST
Copyright © 2013 Dharma Trading Co. All Rights Reserved.
Drag and Drop chips to the Palette first.