Chemicals





	Home New Stuff How-To Instructions Featured Artists Clearance Items Group Project Supplies

Share This Page

		Chemicals
	As with any other project you set out to do involving Procion dye, there are Chemicals you should not do without. The required chemicals you need to get when you use our Fiber Reactive Dye are: Soda Ash Fixer (#FIX) - makes the dye permanent! Urea (#UREA) - if you are doing direct application Synthrapol (#SYN) - gets the excess dye out and away from the lighter colored or white areas

Soda Ash Fixer

Required to 'fix' or 'make permanent' Dharma Fiber Reactive Dyes.

Synthrapol is used as both a pre-wash and as an after-wash. A "must have" for dyers! New - low foam available.

Urea

Used for tie-dye or direct application with Fiber Reactive Dyes -helps dissolve and yield brighter colors.

Calsolene Oil

Liquid wetting agent increases evenness of dyeing.

The most economical thickener for Fiber Reactive Dyes and works as a thickener for other liquids as well, including all liquid Silk Dyes.

Milsoft

Liquid textile softener which restores the soft feel to fabrics that dyeing sometimes removes.

If you'd rather speak with a human, please call toll-free from anywhere in the U.S. or Canada 8am to 5pm PST

Phone: 800-542-5227

Referring This Page

You are getting ready to send this page to a friend: Chemicals

Your email address:

Do You Want Email Updates, Sales, etc.?	Yes No

Email address to send to:

Your Friend's Name (optional)

Rest Easy! We do not collect email addresses and do sinister things with them.