Required to 'fix' or 'make permanent' Dharma Fiber Reactive Dyes.

Used for tie-dye or direct application with Fiber Reactive Dyes -helps dissolve and yield brighter colors.

Non-toxic, less expensive Synthrapol substitute! Used as both a prewash and as an afterwash....a "must have" for dyers!

Synthrapol is used as both a pre-wash and as an after-wash. A "must have" for dyers! New - low foam available.

Increases dye washfastness, resistance to perspiration staining and seawater fading. Used to "fix" fugitive dye so fabrics won't bleed in future. Enhances the actions of Soda Ash for darker Fiber Reactive colors in the dyebath technique.

Add it to your dye-bath and it dissolves instantly with barely a stir or agitation - a big time saver compared to regular salt.

For use with iDye for natural fabrics. Increases wash fastness, helps stop bleeding and helps prevent back staining.

One packet of iDye sun blocker will block up to 96% of the sun's harmful UV rays from hitting sensitive skin through clothes for up to 20 washings.

Use this little packet of color remover to remove color, lighten color, or brighten whites. It’s like a bleach, but not. Safe for all fabrics!

iDye Poly Color Intensifier is already included in the 1/2 oz. packets of iDye Poly, but is sold separately for the 1 lb. sizes and needs to be added.

When you don't have time to iron or heat press your fabrics - AirFix is a great way to just paint and go!

Use with Industrial Polyester Dye on most polyesters, nylons, and acetate to fix the dye to the fiber.

This fixative is designed for use with the Alter Ego Dyes. It is required to set the dye on the fabric.

Promotes even dyeing if you have 'hard' water.

Liquid textile softener which restores the soft feel to fabrics that dyeing sometimes removes.

Citric Acid is a weak odorless organic acid found in citrus fruits. Designed for use with Acid dyes on silk or wool.

The most economical thickener for Fiber Reactive Dyes and works as a thickener for other liquids as well, including all liquid Silk Dyes.

A shortcut fixative for painting with Fiber Reactive Dyes on small projects.

Thickens any liquid dye solution when you need to apply it like a paint. Easy to use, no fussing, no danger of lumps.

Liquid wetting agent increases evenness of dyeing.

Use this product to stop the bleaching action of regular bleach.

Add to regular bleach to thicken it so you can paint it on clothing for discharging. Holds up better than Alginate or Monogum.

Use deColourant to remove the color from dyed natural fabrics, such as cotton, silk, wool, or linen.

Use to ensure your screen printing colors will pop on dark fabrics without laying down an undercoat of white ink.

Removes or "discharges" dye from whole pieces of fabric. Also used in "reverse" tie-dye or shibori of an already dyed garment. Used in Indigo dyeing as well.

Great for spot touch-ups. Can be painted, printed, or stenciled on. Use with a steam iron.

This is what is used to make fabric bright (fluorescent) white after it's bleached.

The best hand cleaner out there for removing dyes.

Improves the yield of Procion colors containing #25 Turquoise.

Silk Salt can be sprinkled onto wet silk paint or dye to create a variety of interesting effects.

'Fixes' or sets dyes on cotton to prevent color bleeding during washing.

Add to dye mixtures when steam setting Fiber Reactive Dyes to produce the brightest colors.

This is a water-based non-toxic fire retardant solution that is sprayed on with a sprayer - works on most fabrics.

Ray Bloc is an advanced UV fabric protection treatment that can be used to help fight off harmful UVA and UVB rays.

Aqua Armor is a safe and easy to use waterproofing spray for all furnishings and fabrics.

Tannic Acid or tannins is a mordant (fixative) for natural dyes on plant based fabrics

Used as a mordant in natural dyeing and for preparing fabrics for marbling.

Great product! Recommended by many of our customers for washing their important and/or delicate items. Better than the usual stuff people use!

Fiber Etch dissolves plant fibers like cotton and rayon and linen.

Use to check the acidity/alkalinity of solutions when dyeing.

Use this with Procion Liquid H or Procion MX powder dyes to print, stencil, or paint.

For making the jelly-like solution that marbling paints float on.

An 8:1 blend of white filtered Beeswax and Damar Resin, perfect for encaustic applications.

Used to harden Beeswax and raise it's melting temperature for Encaustic (painting with wax) applications.

Translucent compound of waxes and resin to be mixed with oil paint, powdered pigments, Pearl Ex pigments, dyes, and other compatible fine art materials.

A collection of leather cleaners, preparers and protective finishes.

Original all-in-one sealer, glue and finish. Perfect for wood, paper fabric and other porous surfaces like terracotta, plastic, foam and candles.

Fire Retardant Wood Coating available in black, white and a base for mixing custom colors.

Fire Retardant Clear Matte for use on wood, fiberboard, plasterboard, cardboard, foliage and other decorative surfaces

Fire Retardant Latex Varnish for use on wood, fiberboard and plasterboard.