My Palette
Drag Color Chips
HERE
 

Mylar Carrier Sheets

 5.00 ( 4 review )
Click here to add or update a review for this product.

Stock# Product Details Quantity 1-4 5+
#PTMY
 
Sorry, these are discontinued.
$3.15
$2.79
All prices calculated in US$
About:  Security - Shipping - Returns
  • Description
  • Measurements
  • Instructions
  • Brochures
  • FAQ
  • Tutorials
  • Videos
Product Description
Make your own sparkling HotFix jewel or metal Transfer Motifs! Mylar Carrier sheets are great for holding the HotFix Crystal Jewels, also the Rhinestuds and Studs, in patterns so that you can heat set the whole design to your garment in one fell swoop with a steam press, heat press or iron. You can really think about the design and change it around if you want as you go, before you make it permanent. It also holds the stones in place when heat setting so they don't move around. 10" x 11" Sheets of heat resistant Mylar with a protected sticky side.
• Cut them to the desired size (allow about 1/2" border) and peel off the protective white backing. Lay the clear Mylar sheet over your image or drawing, sticky side up.
• Place Rhinestones, Nailheads, or Rhinestuds face down (glue side up) in your desired pattern (tweezers really help! see our Precision 6" Curved Tweezers)
• Flip your new transfer motif over onto your garment, fabric, etc. with the glue backs down, Mylar sheet up
• Use an Iron, Heat press or Steam Press (on dry heat) to melt the glue and permanently attach your design (if you are using an iron, use the Cotton setting, no steam).
• Place a pressing cloth over the Mylar Carrier Sheet and press for 15 seconds in each section there are embellishments. Keep in mind if your have more than one type of embellishment ( Crystals, Rhinestuds, Nailheads) the time required for heat setting my take longer.
• You can lift up the corner of the Mylar Carrier Sheet after it has cooled to see if the embellishments are properly set. If they lift up lay the Mylar Carrier Sheet back down, the pressing cloth and heat set some more.
• Let cool, then peel the Mylar off.
Made in: UNITED STATES (USA)

Sorry, these are discontinued.

PRODUCT REVIEWS
4 Reviews
 (4)
Average Customer Review
Click here to add or update a review for this product.
 (0)
 (0)
 (0)
 (0)
MOST HELPFUL REVIEWS
5/1/2008
5
This is very handy. I was able to use this over a design I had. I used tape to hold it in place while I put the crystals down glue side up. It held them very well! and it was easy to move them around with my tweezers too. It does take longer than 15 seconds to heat them sometimes 30-45 you just need to check it.
Was this review helpful? 
4 of 5 users found this review helpful.
11/10/2010
5
EXCELLENT!!
Was this review helpful? 
1 of 2 users found this review helpful.
5/27/2011
5
Excellant! Very easy to use!
Was this review helpful? 
1 of 1 users found this review helpful.
1/27/2009
5
No problems with these at all. They do exactly what I need them to do!
Was this review helpful? 
1 of 1 users found this review helpful.
MOST RECENT REVIEWS

Customer Comments
 

If you'd rather speak with a human, please call toll-free from anywhere in the U.S. or Canada M-F 8am to 5pm PST
Phone: 800-542-5227

Drag and Drop chips to the Palette first.