We love this tips and are very sad to report that the manufacture who makes them went out of business. There is a slight chance that another company could pick up where they left off but at the moment our source is running out. We should still be able to get the 4's but the rest of them when they are out they are out and unfortunately we don't know if they will be back at all.
This is the best of the metal tips for applying guttas and resists. It comes with its own little plastic case with a wire "hole cleaner". The squeeze bottle comes with it. It is a little more difficult to put together than our other gutta applicators, but pros say it's worth it.
You cut off the end of the spout 1/8 inch below the first joint and then insert the tip from the inside so the end pokes out. Use a ballpoint pen to gently push the tip in so the tip protrudes a little and stays there. Easy does it, if you push too hard, you'll split the plastic.
The big advantage here is that the tip can't come off unexpectedly; it also comes in a finer size than other applicator bottles, for the finest of fine lines! Useful for applying gutta, water based resists and medium to thick consistency paints or thickened dyes in a fine line.
NOTE: Bottle shape may vary slightly depending on stock. Bottle holds 1 oz. worth of liquid. See image #2 for current bottle shape!
Available in #4, #6, #8, #10 (thin to thick).
Made in: FRANCE (FR)
Measurements coming soon!
Professional Metal Tip Gutta Applicators