Henna Kit Instructions
Mixing Your Henna
- Pour mordant into the henna powder bottle.
- Mix with wooden mixing stick.
- Pour eucalyptus oil into the mix.
- Mix very thoroughly for 5 minutes.
- Let the mixture age for 45 minutes.
- Stir briefly before use.
- Use within 24 hours for best results.
- Screw metal applicator tip onto henna bottle.
Note: If it is difficult to squeeze out paste, add a few drops of water as needed.
Application
- Prepare skin: Thoroughly wash the area before applying henna to remove lotion, body oils, and dead skin which act as barriers to the henna stain.
- Apply henna: Gently squeeze the applicator bottle to release the henna. Avoid touching the skin with the applicator tip.
- Maintain flow: If the nib gets clogged, use the straight pin to remove debris.
- Initial drying: Let henna dry on skin for 10-15 minutes.
- Set the design: Lightly apply the citrus/sugar solution with a cotton ball for a longer-lasting, darker color. Do not over-saturate as this will dilute and spread the henna, making fine lines thicker. Stop applying when the henna becomes black and glazed.
- Final setting: Leave henna on skin as long as possible (up to 12 hours for best results). Minimum 3 hours usually produces a dark, solid color.
- Removal: Remove henna with a cotton ball and vegetable oil. Avoid wetting the area for 24 hours. Color will continue to darken overnight.
Safety
If you are prone to allergies or have sensitive skin, do a small test design and wait 24 hours before proceeding with elaborate designs.
Tips for Success
- Test applicator flow on a paper towel before use
- Soak metal applicator tip in hot water between uses to prevent clogging
- Start with simple designs, then add complexity
- Turn mistakes into part of your design
- Protect surfaces and clothing - henna stains permanently
- Wear gloves to keep henna off hands and fingernails
- For overnight setting, wrap area with paper towel and tape to protect bedding
