Festive Silk Scarf With Jacquard Starter Set

Festive Silk Scarf With Jacquard Starter Set

A great silk painting tutorial using our Jacquard Starter Set. The possibilities are limited only by your own imagination.

Create beautiful festive silk scarves using the Jacquard Silk Colors Starter Set. This technique uses resist and silk dyes to create stunning designs with professional results.

Let's get started!

What you'll need

Step 1: Prepare Your Silk

Prewash silk scarf in Dharma Dyers Detergent and iron smooth and stretch it on the stretcher bars. Pour some resist into gutta applicator bottle (how much you need depends on your design).

Trace and follow your design or make it up as you go!

Step 2: Apply Your Design

You can either freehand your design onto your silk or draw it on a sheet of paper with a black felt tipped pen so you can see it through your silk. Then place your paper design under the silk and carefully apply the resist over the lines. Once you've finished your design allow the gutta to dry completely.

Don't be shy with the resist!

Step 3: Mix Your Dyes

Mix your dyes as needed (pour or eyedropper each color into a small container so as to not contaminate the original bottle of dye when doing so). You can mix colors together, dilute to taste or not at all if you like the colors the way they are.

Sumi brushes work wonderfully for this

Step 4: Paint Your Design

Paint in your design, using the sumi brush from kit. To make the details on the leaves, once the leaves are painted and allowed to dry, go back into the leaf and with your sumi brush dipped in a little water, brush a small amount onto leaf while holding a heat gun or hair dryer and dry while painting. It will form the tiny veins in the leaves. Using the foam brush, paint background colors.

Dry and come back in for darker color or more detail

You can also heat gun while you go in color shading

Bigger brushes for the background areas

Step 5: Let Dry

Once painting is complete, allow to dry thoroughly. At this point you can choose to steamset your scarf or use the dyeset included in the kit.

Add dyeset while still stretched

Step 6: Apply Dyeset (Optional)

To use dyeset, mix about 2 capfuls of dyeset into 8 ounces of water. While scarf is still stretched on the bars paint the dyeset over the painted areas not painting over the resist. Wait 5 minutes and remove scarf from stretcher bars and rinse in cool water. While the dyeset does work it doesn't give the intense colors as steamsetting.

Step 7: Steamset for Best Results

To steamset, you can purchase our Stove Top Steamer. If you want something larger, there is always the Vertical Electric Steamer.