Osage Orange, Maclura Pomifera, is a shrub-like tree that is unrelated to citrus oranges and is native to the United States, mainly Texas. It produces a textured fruit that isn't popular for eating. The wood is used for woodworking. It is the heartwood, not the fruit, which produces a bright yellow dye that we can use on textiles.
Check out our tutorial on Osage Orange and Annatto.
Made in: UNITED STATES (USA)
How To Use Osage Orange Natural Dyes
Dharma used a simple recipe to get these great colors with our natural dyes so you can have a reference for the colors they will give.
Keep in mind there are many recipes and mordants that will yield a wide range of colors and shades from each dye material, so consult a natural dye book for more on this. We carry
For the deepest colors, use a ratio of 1 to 1 dyestuff to fabric, or 2 oz dye to 2 oz fabric, but you can still get good colors using much less dye. We used about 3-4 tablespoons per yard of fabric. The dye bath can be reused to get lighter shades. Experimentation is the best way to determine the right amount of dye for the type of fabric you are using and the color. We found the silk and velvet absorbed the colors the deepest. Some cottons will yield different and deeper shades using Tara Powder (a form of tannic acid) as a mordant with soda ash as an assist.
Yellows can be overdyed with indigo to get shades of green, and reds overdyed with indigo will give purples.
Prewash your fabric with synthrapol, rinse well.
To mordant the fabric (or fiber or yarn) simmer together with 1.75 tsp Alum and (optionally) 1 tsp Cream of Tartar per pound of fabric for 1 hour. Allow the fabric to cool in the solution. Squeeze out excess water from material. Rinse and discard solution (all the alum will be absorbed by the fabric). You can allow the fabric to dry if you want to stockpile some pre-mordanted material, but you want to use it in about a month as over time the alum can degrade the fabric.
Measure and simmer your dyestuff for an hour using enough water so your fabric can move freely, allow to cool. You may need to chop up larger roots, such as when you use madder. Roots also like to be soaked overnight for some of the darkest shades. This is best done before you mordant or at the same time.
Strain out any roots, shavings, etc.
Add wet fabric and simmer for an hour, allow to cool in dye bath for maximum color absorption. Be sure to stir periodically for even dyeing, turning fabric frequently while simmering. You can save and reuse the dye bath for lighter shades.
Give the fabric a final gentle wash with synthrapol and rinse.
You can also check out our tutorial on Osage Orange and Annatto.