Picture above is fairly representational, but because of supply chain issues, we cannot always get ones that look exactly like the picture.
Bottles include 1 Yorker spout w/a small conical snap-on cap* but we can substitute 1 white, flat screw-on lid/cap instead by request.
*The little snap-on on Yorker Spout tops ARE NOT available for separate purchase, they only come WITH the Yorker spouts. Due to limited available inventory the color of Yorker snap-on caps is either red, yellow or clear. Stock may be mixed.
Use these for storing and applying liquid dyes. Perfect for tie-dye! Occasionally, since these are inexpensive and mechanically mass produced, some spouts will come in that don't "squirt straight" or leak around the threads. Plumber's tape, that thin white stretchy stuff that is under a buck at any hardware store or other place with some irrigation supplies, is a quick easy fix for leaking - a couple of wraps around the threads works like a charm - no tie-dyer should be without it! A simple quick poke with the end of a paper clip will open the tip properly.
*Pro Tip: paste up your dyes in a separate container. Then, using a funnel, pour into the squeeze bottle and add your water as usual. Much less messy.
Spouts and caps: We've had people ask, so, for the inquiring minds, the 2/4/8/16 oz. bottles use 24-410 spouts and caps. The 32 oz. bottles use 28-410 spouts and caps.
Call for case pricing!
Made in: UNITED STATES (USA)
LDPE HDPE Height Diameter Spout Diameter 2oz. X 9cm 3.5cm 13mm (Long Cylinder) 4oz. X 11cm 5cm 17mm (Boston Round) 8oz. X 13cm 5.5cm 17mm (Boston Round) 16oz. X 19.5cm 6cm 17mm (Long Cylinder) 32oz. X 22.5cm 8cm 20mm (Long Cylinder)