P100 Particulate Filter Set

#2091 - P100 Particulate Filter Set: This is for one set of filters only. For use with 3M's Reusable Respirator.

• well suited for a wide range of oil and non-oil based particulate contaminants and can be used as a prefilter for certain chemical exposures. Use when mixing dye powders and other powder chemicals.
• Passing NIOSH’s P-series test criteria, the 2091 P100 filter provides a minimum 99.97% filter efficiency, better than N95

USE FOR:

Powdered dyes and associated chemicals for dyeing. Solids such as those from processing minerals, coal, iron ore, cotton, flour, and certain other substances. • Liquid or oil based particles from sprays that do not also emit harmful vapors. • Metal fumes produced from welding, brazing, cutting and other operations involving heating of metals. • Asbestos.

DO NOT USE FOR:

Gases and vapors, including those present in paint spray operations, unless combined with approved chemical cartridges. • Sandblasting. • Oxygen deficient atmospheres. • Aerosol concentrations that exceed 10 times the permissible exposure limit

WHEN TO REPLACE YOUR FILTER:

Replace the filter if the filter becomes damaged, soiled, or breathing becomes difficult. If used in environments containing only oil aerosols, dispose of filter after 40 hours of use or 30 days, whichever is first.

Check out the #3M-6200: Half Facepiece Reusable Respirator and the #3M-60926: Multi Gas/Vapor Cartridge & P100 Filter Set