My Palette
Drag Color Chips
HERE
 
Chemicals 

As with any other project you set out to do involving Procion dye, there are Chemicals you should not do without.

The required chemicals you need to get when you use our Fiber Reactive Dye are:

    Soda Ash Fixer (#FIX) - makes the dye permanent!
    Urea (#UREA) - if you are doing direct application
    Synthrapol (#SYN) - gets the excess dye out and away from the lighter colored or white areas

Soda Ash Fixer
Soda Ash Fixer
Soda Ash (Pure Dense Sodium Carbonate) is required to 'fix' or 'make permanent' Dharma Fiber Reactive Dyes. Available in 1, 5, 10, and 25 lb. sizes at discount prices. 
Synthrapol Detergent
Synthrapol Detergent
Synthrapol is used as both a pre-wash and as an after-wash. A "must have" for dyers! New - low foam version is also available.
Urea
Urea
Used for tie-dye and direct application dyeing with Fiber Reactive Dyes to yield deeper, brighter colors.
Calsolene Oil
Calsolene Oil
Liquid wetting agent increases evenness of dyeing.
Sodium Alginate Thickener
Sodium Alginate Thickener
The most economical thickener for Fiber Reactive Dyes and works as a thickener for other liquids as well, including all liquid Silk Dyes.
Milsoft
Milsoft
Liquid textile softener which restores the soft feel to fabrics that dyeing sometimes removes.

Customer Comments
 

If you'd rather speak with a human, please call toll-free from anywhere in the U.S. or Canada M-F 8am to 5pm PST
Phone: 800-542-5227

Drag and Drop chips to the Palette first.

>>>>>>> 1.2