We used to carry the Print on Silk
sheets in only two fabrics, Habotai 10mm and Organza 5.5mm (previously known
as #PTOO - Extravorganza). But now you have your choice of 6 different silk
fabrics that behave just as the original habotai and organza sheets.
Specially treated, paper backed, 8.5" x 11" sheets of silk fabric run smoothly
through all brands of inkjet printers. The fabric is treated with the
Fabrisign
coating so the colors remain permanent and water resistant, no matter what
inks you use.
Also, the fabrics will remain soft with no 'feel' left over from the coating
and printing. Please note that
while permanent
and water resistant, the fabric should not be washed or dry cleaned as
this can degrade the color quality. But, a gentle rinsing with cold water and
synthrapol
can remove excess ink that could run if the piece is exposed to liquids.
Very easy to use:
1. Create your design onscreen
2. Test on paper for orientation
3. Increase ink saturation in your printer options
4. Load 1 sheet of your inkjet fabric
5. Print your design
6. Peel the fabric off the paper backing
7. Allow to dry for 24 hours