My Palette
Drag Color Chips
HERE
 

Hang It Dang It Quilt Hanger

 0 ( 0 review )
Click here to add or update a review for this product.

Say goodbye to that ugly row of nail holes in your wall and say hello to the “Hang it Dang it” quilt hanger! The Hang it Dang it will hang your quilt on just one nail in the center. 

The Quilters Hangup Quilt Sleeve is designed to be the perfect match for this unique item.

Self leveling: The “Hang it Dang it” is the only quilt hanger available anywhere that is self leveling and only needs one nail or hook to hang your quilt.  This allows you to hang your quilt straight and level in less than a minute.

No tools are needed: Once you have your nail or hook on the wall, there is nothing to cut, nothing to level and nothing to measure. Simply attach the hang it dang it to your quilt and hang it on the wall.

It only takes one person to hang any size quilt: With the hang it dang it attached to your quilt, it is very easy to pick up in the middle and hang on the wall regardless of the size quilt.  You no longer need someone to hold the other end.

Less damage to your walls: You only need one nail or hook to hang your quilt, you can change to another size quilt and still use the same nail.  Say goodbye to that row of nail holes in your wall that you used to need to hang different size quilts.  If you don’t want any nail holes in your wall, 3M makes a sawtooth picture hanger #17040 with command strips that works perfectly with our hanger.

Change to a different size quilt in seconds: If you want to hang a different quilt in the same spot, simply transfer the hang it dang it to the other quilt and hang it on the same nail or hook. 

Adjustable length: The Hang it Dang it is available in three different sizes and each size is infinitely adjustable.

Adjustable for out of square quilts: If you find that after hanging your quilt, the top is straight, but the sides or bottom do not look right, you can adjust the hang it dang it to one side or the other to fudge the difference.

Holds up to 40 lbs.: The Hang it Dang it is rated for 40 lbs. which means there is no chance it is ever going to come off the wall unless you want it too.

Heavy duty construction: The Hang it Dang it is specially made out of heavy duty anodized aluminum that will not rust, chip or discolor.  

Invisible: The Hang it Dang it quilt hanger is hidden from sight while displaying your quilt.  Nobody will know how easy it was to hang your quilt unless you share it with them. We certainly hope you will.

Anybody can do it: Last but not least, anybody can hang any size quilt with the hang it dang it quilt hanger, all by themselves.

Made in: Made in: CHINA (CN)

Up to 10% off list price!

Sorry, these have been discontinued.

  • Colors & Ordering
  • Description
  • Instructions
  • Brochures
  • FAQ
  • Tutorials
  • Videos
 Instructions:
 
1. Remove the hanger bracket from the hanger rod by popping it off with your fingers (this may be difficult at first). Looking at the back of your quilt, find the center point on the top edge and place a straight pin there. (A quick way to do this is to fold your quilt in half.)
 
2. Place your quilt on a flat surface with the sleeve side up making sure the sleeve lies flat and straight. Lay the hang it dang it on the sleeve with the center mark aligned with the straight pin. Loosen the end tubes with a slight ¼ turn twist in either direction and extend each end out to the edge of the sleeve and gently retighten. It takes very little effort to lock the tubes in place, do not over tighten them. At this point, the center mark of the hang it dang it should be aligned with the straight pin and the end tubes should be aligned with the edges of the sleeve on either side. 
 
3. Insert the hang it dang it into the sleeve keeping it snug to the top edge with the ends aligned with the edges of the sleeve. 
 
4. Attach the bracket to the hang it dang it. Grasp the hanger bracket firmly on each end and attach it to the hanger rod in the center. The bracket will snap on to the hanger rod and remain held in place. This may take a couple of tries until you get the feel for it. (to remove bracket see step 6) Hang your quilt on the wall and enjoy it, knowing you can change it to a different one just as fast and easy!
 
5. If your quilt is not hanging level, this means the hanger bracket is not centered or the weight is not evenly distributed. You can adjust this by grasping the quilt and hanger rod in one hand and sliding the hanger bracket slightly towards the low corner. 
 
6. There are two ways to remove the hanger bracket when it is installed on a quilt. The first is to hold the bracket 
and quilt while pulling the hanger rod out of the sleeve. The second way is to hold it on a flat surface and use 
your thumb to pop it off.
 
PRODUCT REVIEWS
0 Reviews
 (0)
Average Customer Review
Click here to add or update a review for this product.
 (0)
 (0)
 (0)
 (0)
MOST HELPFUL REVIEWS
MOST RECENT REVIEWS

Customer Comments
 

If you'd rather speak with a human, please call toll-free from anywhere in the U.S. or Canada M-F 8am to 5pm PST
Phone: 800-542-5227

Drag and Drop chips to the Palette first.