Dharma Fiber Reactive Procion Dyes - Sorted By Number
USE FOR: Tie-Dye, Tub Dyeing, Low Immersion Dyeing, Batik, Dye Painting, Silk Painting, Screen Printing, even Tie-dyeing Silk in a Microwave
USE ON: All natural Fibers (Cotton, Rayon, Hemp, Silk, etc.), Wood, Cane, and Rattan
Since 1969 Dharma Trading Co. has been the #1 source for dyes for Tie-Dye
When all is said and done, there is no better dye for natural fabrics than Fiber Reactive Procion Dye. This is the dye you've seen on tie-dyes on the street and at concerts.
All 100 colors are brilliant, mouth-watering, and permanent. They don't fade, even after repeated washings. They are economical, safe and easy to use. Superior to supermarket dyes in every way! Buy in small quantities, in bulk, or in kits.
Colors below are intended as a guide, as monitors and results on different fabrics can vary. If you need a really specific color, it is good to test. The colors can also be mixed for an endless pallet!
Prices begin at $2.95 and vary by color and size. See the order form below for specifics.
Available Colors
Sort By ColorNameSizesQuant
PR1 : LEMON YELLOW (Primary)
PR2 : BRIGHT YELLOW
PR3 : GOLDEN YELLOW
PR3A : CLEAR YELLOW
PR4 : DEEP YELLOW
PR5 : SOFT ORANGE
PR6 : DEEP ORANGE
PR6A : ECRU
PR7A : PEACH
PR8 : RUST ORANGE
NameSizesQuant
PR8A : PAGODA RED *
PR9 : SCARLET *
PR10 : FIRE RED *
PR10A : CHINESE RED *
PR11A : ROSE RED
PR12 : LIGHT RED
PR12A : BABY PINK
PR13 : FUCHSIA RED (Primary)
PR14 : CORAL PINK
PR14A : HOT PINK
NameSizesQuant
PR15 : AMETHYST
PR16 : MAROON *
PR17 : BURGUNDY *
PR18 : DEEP PURPLE
PR18A : ULTRA VIOLET
PR19 : PLUM
PR19A : LILAC
PR20 : DUSTY ROSE
PR21 : TEAL BLUE
PR22 : COBALT BLUE *
NameSizesQuant
PR23 : CERULEAN BLUE *
PR23A : ELECTRIC BLUE * (T)
PR24 : NAVY BLUE **
PR25 : TURQUOISE * (T) (Primary)
PR26 : SKY BLUE
PR27 : MIDNIGHT BLUE *
PR28A : AQUA MARINE * (T)
PR28B : BETTER BLUE GREEN * (T)
PR29 : BRIGHT GREEN (T)
PR30A : NEW EMERALD GREEN * (T)
NameSizesQuant
PR31 : DARK GREEN *
PR31A : FOREST GREEN *
PR32 : OLIVE DRAB
PR33 : AVOCADO
PR34 : RUST BROWN *
PR35 : DARK BROWN *
PR35A : CHOCOLATE BROWN *
PR36 : MAROON BROWN *
PR36A : HAVANA BROWN *
PR37 : BRONZE
NameSizesQuant
PR38 : KHAKI
PR38A : BLUE GRAY
PR39 : BLACK **
PR41 : CHARCOAL GRAY
PR43 : BLUE VIOLET (T)
PR44 : BETTER BLACK **
PR45 : JUNGLE RED **
PR46 : BRILLIANT BLUE
PR47 : CHARTREUSE (T)
PR48 : BABY BLUE
NameSizesQuant
PR49 : RED WINE *
PR50 : JADE GREEN (T)
PR51 : PLUM BLOSSUM (T)
PR56 : AZURE BLUE *
PR60 : LAVENDER
PR61 : ICE BLUE
PR62 : PEACOCK BLUE * (T)
PR64 : ORCHID
PR65 : RASPBERRY (T)
PR66 : KELLY GREEN * (T)
NameSizesQuant
PR67 : MARIGOLD
PR70 : SAPPHIRE BLUE *
PR75 : SAFARI GRAY
PR76 : WEDGEWOOD BLUE
PR77 : ALPINE BLUE
PR80 : ROBIN'S EGG BLUE (T)
PR83 : WISTERIA
PR85 : SEAFOAM
PR86 : CLARET
PR93 : KILT GREEN *
NameSizesQuant
PR95 : ROYAL BLUE **
PR96 : LAPIS
PR97 : CITRUS YELLOW
PR98 : BUBBLE GUM
PR101 : CAMEL
PR105 : PEWTER
PR108 : CAYMAN ISLE GREEN (T)
PR111 : BLACK CHERRY *
PR112 : PERIWINKLE
PR113 : GOLDEN BROWN
NameSizesQuant
PR114 : IVORY
PR115 : EGGPLANT **
PR116 : BRAZILNUT *
PR117 : GRAPE
PR118 : YUCCA
PR119 : RED VIOLET
PR120 : TANGERINE
PR121 : SUNRISE RED
PR130 : STRONG NAVY *
PR131 : IMPERIAL PURPLE *
NameSizesQuant
PR132 : CARIBBEAN BLUE * (T)
PR134 : MOSS GREEN *
PR135 : TRUFFLE BROWN *
PR136 : OXBLOOD RED *
PR137 : MINK BROWN
PR138 : PALOMINO
PR139 : MIST GRAY
PR140 : SAGE GREEN
PR250 : JET BLACK **
PR300 : NEW BLACK **
About:  Security - Shipping - Returns
• Colors without a star require 1 level tablespoon (1/4 to 1/2 oz.) for each lb. of fabric to closely match the color card. Note that more precise results can be achieved using a scale and our Procion Dye Yields Estimator.
• Colors with * require 2X as much dye.
• Colors with * * require 4X as much dye.
Colors marked (T) contain #25 Turquoise these colors:
1. Require more rinsing to remove the excess dye than do other colors.
2. Warmer tap water (up to 130ºF) when vat dyeing, can yield deeper shades.
3. Using Glauber's salt instead of plain salt when vat dyeing can also improve results.
#56 Azure Blue also yields deeper shades when vat dyed at a higher temperature (hot tap water 130º to 150ºF).
A Few Things About Black Dye:
There are 4 blacks. Each has a different color cast. All except #250 work well in direct application methods like tie-dye where the fabric is kept moist long enough for the dye to develop full color. You will see some differences depending upon which you use, your particular situation, and your techniques. When vat dyeing (solid shade dyeing), there are some clear differences...
#44 Better Black
Vat dyes with a purple-blue cast and edges are blue in tie-dye.
#39 Black
Vat dyes with a green cast and edges are blue in tie-dye.
#250 Jet Black
This is the most concentrated of all the blacks and gives the deepest black when used for vat dyeing with hot tap water (130° to 150°F).
#300 New Black
Vat dyes with a very blue cast and edges are blue in tie-dye.
For best vat dyed blacks, use Dharma Dye Fixative in a rinse. Black is a tough color - use a lot of dye and when vat dyeing, double the salt. Do NOT use Fiber Reactive Procion Dye to get black on silk, use acid dye on wool and silk for solid black.
Soda Ash Fixer
IMG:SODA ASH FIXER Dharma Fiber Reactive Dye must be 'fixed' (made permanent) with Soda Ash. About 1 lb. Soda Ash per 4 oz. of dye is needed when garment dyeing or per 3 lbs of fabric as a pre-soak when tie-dyeing.
Stock# Description Quantity Price
#FIX1  1 lb. (approx. 1.75 Cups) $1.69
In Stock Now.
#FIX5  5 lbs. (approx. 9 Cups) $5.95
In Stock Now.
#FIX10  10 lbs. (approx. 18 Cups) $11.25
In Stock Now.
#FIX25  25 lbs. (approx. 44 Cups) $22.95
In Stock Now.

Teeny Tiny Tie-Dye Kit
Teeny Tiny Tie-Dye Kit Everything you need for tie-dyeing about 6 T-shirts (except the shirts).
STOCK# Size/Color/Style Quantity 1-9 10-19 20+
#TTTDK   $14.95 $13.66 $12.36
In Stock Now.

Serious Tie-dye Group Kit
Serious Tie-dye Starter Set Everything you need for tie-dyeing about 20 T-shirts (except the shirts).
STOCK# Size/Color/Style Quantity 1-9 10-19 20+
#PROSS   $25.95 $23.65 $21.36
In Stock Now.

Tie-Dye Little Group Kit
Tie-Dye Little Group Kit

Everything you need for tie-dyeing about 50 T-shirts (except the shirts).

Stock# Quantity Price
#PROGK50 $47.95
In Stock Now.

Tie-Dye Big Group Kit
Tie-Dye Big Group Kit

Everything you need for tie-dyeing about 100 T-shirts (except the shirts).

Stock# Quantity Price
#PROGK100 $74.95
In Stock Now.

Hand Dyed Fabric Starter Set
noimage Everything you need to try out hand-dyeing fabric with Dharma Fiber Reactive Dyes. (Just add fabric!)
Stock# Description Quantity Price
#HDFSS  Hand Dyed Fabric Starter Set $41.95
In Stock Now.
#HDFSSNB  Hand Dyed Fabric Starter Set - NO BOOK $19.50
In Stock Now.
Complete kit except for the book: Color by Accident

Procion Deluxe Batik Starter Set
IMG:PROCION DELUXE BATIK STARTER SET Contains all the essentials for both tub dyeing and direct application methods of batik.
Stock# Description Quantity Price
#DBSS  Deluxe Batik Starter Set $49.95
#DBSSNB  Deluxe Batik Starter Set / NO BOOK $38.95
In Stock Now.

Product Description
Our Dharma Fiber Reactive dye is the dye of choice for all cellulose fibers, like cotton, rayon, hemp, etc. They are also sometimes used for silk and wool because they are so economical. This is the dye you've seen on tie-dyes on the street and at concerts - the colors are brilliant and permanent. They don't fade, even after repeated washings. Because they don't come off, they are even safe on infant clothing, once properly washed out. They are economical, safe and easy to use. Superior to supermarket dyes in every way! Buy in small quantities, or in bulk or in kits. Dharma Fiber Reactive Procion Dyes are good for all the techniques listed below and more!
We also have four Fiber Reactive Procion Dye Tie-Dye Kits:
Colors above (from samples done on cotton) are intended as a guide. They may vary from monitor to monitor (depending on the quality and your personal settings) and may not match actual dyed fabrics. Some colors can shift dramatically on protiens such as silk and wool (for example, black gives a lovely maroon or brown). Colors can shift due to water conditions, temperature, etc., and dyelots can vary sometimes. When your end color needs to be very specific, we recommend a test first, before dyeing your main project or going into production. All of the colors can be mixed for an endless pallet!
Dharma's Fiber Reactive MX Dyes FAQ
Dharma's Fiber Reactive MX Dyes FAQ

Question:

What makes Fiber Reactive dyes unique from other dyes? What are all the different ways to make it permanent ("fix" it) on cellulose, and on protein.

Answer:

Fiber reactive dyes, like Procion MX, bond with the fiber at a molecular level, becoming chemically part of the fabric. On cellulose soda ash is the primary fixer. On protein you can use soda ash,but it can damage silk if you soak it for long periods of time. We also recommend using less soda ash for tie dye and tub dyeing. (Let the tie dye sit for a shorter period of time, ie: 4 hrs.) Also, colors may shift on silk. Blue does not combine well with silk, causing all mixes with blue in them to shift toward the other colors in the mix, ie black goes brown or maroon, purple goes raspberry, forest green goes chartreuse, etc.. Vinegar or baking soda can be used with silk as a substitute for soda ash. They require heat for vat dyeing and steam setting for direct application. Some folks use the microwave in creative ways. Procion is not highly recommended for wool as many of the colors break down under the high heat that wool needs in order to dye properly.

Question:

I'm a novice dyer and I'm having trouble with one of the Procion MX dye colors in a dyebath situation. The color is not what I expected. What are the variables that can help me find out what the problem is? When is the problem "fixable" and when is it not?

Answer:

What are you dyeing: cotton, linen, hemp etc.? * What color is it before dyeing?
* What color did you buy?
* Do you have hard water?
* How much does the fabric weigh?
* How much water did you use and how much salt?
* Is the salt plain or iodized?
* How much dye did you use?
* What temperature is the water?
* Did you follow the directions accurately?
* Is the color too light? Dye again
* Is the color too dark? Discharge or bleach and then dye again. This may require a change of color choice.
* Colors are spotty or streaky? Not enough room in the dyebath or not stirred enough. The garment or fabric possibly not totally clean before dyeing. Dry chemicals and salt not dissolved well before entering the dyebath. Solution? See Color too dark.
* Wrong color entirely? Over dye for a different color, or see Color too dark.
* Most problems can be fixed if you are willing to take the extra time and effort.

Question:

Why is mixing dyes to achieve desired colors different from mixing pigments? When looking at dyes or paints, how would you determine what the "primary colors" are (if the catalog didn't tell you). If I want to mix all of my own colors of procion mx dye, how many should I get and what colors would you recommend?

Answer:

Dyes are transparent, pigments are not. Pure colors in dye (primaries) are colors that cannot be mixed from other colors but can be used to create a variety of colors. Primaries in pigments are generally pure colors. Procion lemon yellow, fuchsia and turquoise are the primaries. Pigment primaries are yellow, true red and true blue. To mix all your own colors, we would recommend lemon yellow, fuchsia and turquoise, with the addition of navy, cerulean, cobalt and sky blues. Include golden yellow, fire red, scarlet, chinese red and new black. With the possible choices of maroon brown and deep orange. All fourteen colors should give you plenty of options.

Question:

Which is the best fiber reactive black dye to use?

Answer:

We have 4 black fiber reactive dyes, each with a different color cast. They all work well in direct application methods like tie-dye where the fabric is kept moist long enough for the dye to develop full depth. You will see, however, some differences depending upon which one you use and your particular situation and techniques. When vat-dyeing (when you are dyeing a solid color shade) there are some differences:
  • #39 Black- vat dyes with a green cast and edges are blue in tie dye.
  • #44 Better Black-vat dyes with a purple-blue cast and edges are blue in tie-dye.
  • #250 Jet Black-This is the most concentrated of all the blacks and gives the deepest black when used in vat dyeing with hot tap water (130-150F degrees). Edges are green in tie-dye.
  • #300 New Black-Vat dyes with a very blue cast and edges are blue/pink in tie-dye.
Black is a tough color to get. You have to use a lot of dye and in vat dyeing, you need to double the salt. We recommend a 1/2 and 1/2 combination of #44 and #300 for the blackest black in tie dye.

Question:

What does the Soda Ash do in a dyebath?

Answer:

When you add salt and dye to the dyebath along with the fabric the absorbed dye is locked in the fabric so it will not wash off. The color becomes permanent by adding a solution of dissolved soda ash to the dyebath raising the pH of the water. This allows the dye molecules to react chemically with the fiber molecules. It takes about an hour for this reaction to occur fully and set the dye.

Question:

What does the salt do in a dyebath?

Answer:

The salt helps the dye stick to the fabric. The greater the amount of salt used, the higher the absorption and the deeper the color will be.

Question:

What is Afterfix and how do I use it?

Answer:

Afterfix sets the Procion Dye in the fiber after you have painted the dye on. Just mix the dye with water and a little thickener and paint with it on your fabric. When it's dry cover the painted area with Dharma's Afterfix by painting it on over the dye. After an hour, wash out the Afterfix and the excess dye.

Question:

What does Glauber Salt do?

Answer:

Glauber Salt improves the yield of Turquoise in that it gives more intense color. Use it in place of and in the same proportions as plain salt when dyeing solid shades of Turquoise or colors mixed with Turquoise.

Question:

What is Ludigal?

Answer:

Ludigal is a mild oxidizing agent that helps to prevent dyes from decomposing during fixation.

Question:

What is a fiber reactive dye and what does this mean?

Answer:

Reactive dyes take their name from the fact that they chemically react with the fiber molecules to form a dye-fiber bond. This strong bond between the dye and the fiber imparts excellent wash- and light-fastness. These dyes require two auxiliaries; first salt which acts as an electrolyte that reduces the solubility of the dye. If the dissolution of the dye is controlled in this way a more even dyeing will take place as the dye will be absorbed in the fibers at a steady rate, rather than all at once. The second auxiliary required is soda ash which increases the pH of the dye bath which enables the dye to react with the fiber molecules and fix onto the cloth.

Question:

The dye instructions for Procion Dye tells me to use various amount of salt, urea and oil. What are these additives for?

Answer:

Salt is used in the dyeing process as an electrolyte that aids in the absorption of the dyes into the fabric. Urea is a "moisture drawing" agent which keeps the fabric damper longer during the fixing process, thereby making for deeper, brighter colors. Oil, such as calsolene Oil is a wetting agent used when dyeing tightly woven fabrics for increasing the evenness of dyeing.

Question:

Can I dye wood or reed?

Answer:

Yes you can. First be certain there is no residue or finish on the wood or reed to prevent the dye from seeping in. Determine the amount of water needed to cover the material. For each gallon of water add 1 TBL. of Procion dye (pre-dissolved) and 1/2 cup plain salt. Mix thoroughly. Put material to be dyed into dyebath and turn frequently for 20 minutes. Add 1/3 cup of Soda Ash for each gallon of water used. (Pre-dissolved in hot water and add slowly). Leave in dyebath for up to 2 more hours or until the desired shade is reached. Rinse under running cold water to remove excess dye and dry.

Question:

What is the Cold-Batch Method? How do I dye using this method?

Answer:

The Cold Batch Method:
For applying the dye directly onto the fabric.
Excellent for the Dye painting, Serti technique on silk and Ikat warp painting on wool or cotton as well as just painting.
The following method for using Dharma Fiber Reactive Procion dye is one of the best ways to paint the dye directly onto the fabric. The dye can be thickened with DyeHouse Thickener and used like a fabric paint or the thickener can be left out for water color and wash effects and for the French Serti technique of painting on silk. This method does not require any pre-treatment of the fabric, but the fabric must be "cured" after dyeing, and after mixing up the dye, it must be used up that day.
The first step is to make a cold batch chemical water which can be stored a month or more in the refrigerator. (Make sure it's sealed and labeled!)
The chemical water is made by mixing the following ingredients together:
1. 3/4 cup Urea (dissolve in hot water if necessary)
2. 1 quart water (add a little Water Softener if needed)
3. Add Thickener (sodium alginate) gradually to suit your use, from a tsp up to 4 tsp. Start with one tsp and add more very gradually while you stir to avoid lumps. Allow to set for 2 hours or over-night as it will continue to thicken.
Pour off the amount of chemical water you need for one color (for ease of measurement use 1 cup increments).
To each cup of chemical water add:
1 tsp. Soda Ash Fixer (be sure it dissolves)
Dye to taste (try a pre-dissolved concentrate and drip & stir until color is right).
Do the above for each color you intend to use. Don't mix more than you need for one work session as the addition of the Soda Ash Fixer commences the chemical action and it begins to set, the mixture gradually loses strength and four to six hours later is about half exhausted.
Using the freshly mixed colors paint or print directly onto the fabric.
Let it dry until damp, cover or wrap in plastic or otherwise stop the drying process and let sit for:
12 hours for pastels
48 hours for deep shades
Rinse in running cold water then wash out excess dye using Synthrapol and let dry.

Question:

Which dyes work best on cellulose, silk and wool?

Answer:

Procion® MX - For painting or tub dyeing. Dyes the cellulose (cotton/hemp) like the color chart. Often the protein(silk) comes out a different color, especially colors with blue in them-most of the blue will be absent on the silk- so for example, with #18 deep purple, you would get purple pile (the rayon) and raspberry backing (the silk) on devore velvet. Very cool!! Careful, soda ash is hard on the silk. Limit the time of exposure, or use baking soda instead, and steam, microwave or simmer on the stove.
Procion® H -For painting. Dyes the cellulose and the protein the same color.
Acid Dye for Wool and Silk - For tub dyeing. Dyes the silk really well, stains the cellulose a much lighter shade.

Question:

What's the difference between Dharma Dye Fixative, Retayne, and Dharma Afterfix.

Answer:

Afterfix is Sodium Silicate, a liquid with the consistency of honey. It is an alkali like Soda Ash (Sodium Carbonate) or Baking Soda, only a liquid. Its use is in the "fixing" of Fiber Reactive Dyes, the creation of an alkali environment in which the cellulose and the dye are able to permanently bond together. In vat dyeing, the Ph of the liquid in which the fabric is submerged is changed to about 10.5 at an appropriate point by the addition of soda ash. Afterfix is used by painting it on the fabric over the painted on dye thereby creating a kind of tiny alkali dyebath around each thread.Dye fixatives are cationic agents that work by bonding to the dye molecules within the fiber matrix and "bulking them up"; this "swelling" of the molecule traps it in the fiber and thus makes it significantly more fast. Given this mechanism, dye fixatives are useful with a wide variety of dye types (basically anything that penetrates the fiber matrix and can be wedged there). The amount used is determined by the amount of fabric (and thus the number of dye molecules that need to be bulked.

Dharma Dye Fixative is an industrial "Fixing Agent" used in the dyeing industry as an after-treatment of reactive and direct dyeing. It is intended to improve washfastness, fastness to seawater and perspiration, prevent dye migration during dyeing and improve crockfastness. It is used by rinsing purchased or dyed fabric for 15 minutes in a solution of cool water and about 1 oz. fixative per lb of fabric.

Retayne is also a "Fixing Agent", similar to the Dharma Dye Fixative.

Related Projects
Basic Tie Dye Using Fiber Reactive Dyes
There are many patterns to create with tie-dye. In fact, it's been said that no two are the same. Here is a simple tutorial on how to make one of the most popular designs: the spiral.

Product Reviews

Home | Gift Certificates | Order From Catalog | Request a Catalog | Contact Us
Join Our Mailing List | Customer Service | Track an Order | My Orders | Email This Page
If you'd rather speak with a human, please call toll-free from anywhere in the U.S. or Canada 8am to 5pm PST
Phone: 800-542-5227
Copyright © 2010 Dharma Trading Co. All Rights Reserved.